Starting Car Even With Bad Starter
It's bad and sad when your car wouldn’t start. It requires some fixing. Fixing a bad starter often requires the help of an experienced mechanic, but there are a few things you can do yourself to possibly start your vehicle and get it to the nearest repair shop.
Starting a car with a bad starter is not entirely the same for vehicles with an automatic transmission than it is for those with a manual. With the several tips shared here, one of the tips provided pertains exclusively to manual cars and trucks.
1. Inspect Connections
Inspecting the connections in the car should be the first thing you do. If any of the connections are worn, loose, corroded, or dirty, the starter will have trouble receiving the power it needs to operate properly. This is what causes the car to not able to start.
Check the starter to make sure all associated components are connected properly and tighten them as necessary using a ratchet. You also want to check for corrosion and excessive buildup of dirt.
Having your vehicle routinely inspected and performing maintenance can help avert this problem.
2. Tap The Starter Softly
This tapping technique can be quite effective. All you have to do is gently tap the rear of the starter with a hammer.
Do you know why we tap the starter? It is because as the starter wears out over time, the brushes inside develop inadequate electrical contact with the armature. A gentle tap, therefore, helps knock them back into place, facilitating contact.
A few things you should keep in mind when using this technique. First, be gentle with the hammer so that you don’t damage the starter. Second, this is a temporary fix at best, as it won’t work all the time.
Your best bet, of course, is to have the starter repaired or replaced as soon as possible.
“If it works, you are doing it right.” - Hang
3. Bypass The Relay
If you want to know how to start a car with a bad starter with a screwdriver, bypassing the relay is another old technique that’s worth trying.
The idea is to send the electric directly to the solenoidal coil by connecting the starter’s positive terminal to the solenoid terminal with a wire or even a screwdriver with an insulated rubber handle (you know, so that you don’t get shocked). Basically, anything that can conduct power to start the car. Make sure to do it safely. If not, before the car gets started, you are “ended”.
4. Jump-Start The Vehicle
The purpose of a jump-start is to boost battery power and is generally not a fix for a bad starter, temporary or otherwise.
However, if the starter isn’t receiving enough power because of a faulty connection, supplying it with a powerful surge of current from a bigger, more powerful battery might just give it enough juice to start your engine and allow you to drive to a mechanic.
5. Push Start The Car
Push start the car, the tips for manual car which is also known as bump starting, push-starting involves setting the vehicle in first or second gear, pushing it to a minimum speed of 8-16 km/h, and then engaging the clutch to get the engine to turn over and start.
It should be a last resort employed when the other methods fail to get the car started.
Never attempt to push-start a vehicle on your own. Not only would doing so be dangerous for your car or truck but there is also a high risk of injury and even death.
We hope that these tips can help you to start your car in case your car has a faulty starter. Remember, while trying to start your car, you still need to be careful and ensure your safety.
If you know any other method to start a car, please let us know in the comment section too. We can all use some extra tips.
#CarsteryKing #Keretakew #非车莫属
#AutomotiveUpholstery #TheJourneyToProfession
#Carsofinstagram #Cargram #Mercedesbenz #BMW
#Audi #Volkswagen #Landrover #Jaguar #Honda
#Toyota #Nissan #Mazda
#Startingwithbadstarter